You need to upgrade your Flash Player

ORMIC Baler OCT 100X80 75T

OCT 100X80 -75 T

Description

The ORMIC Baler OCT100X80-75T is manufactured from profiles IPE, HEB, UNP board and steel plates. As all the equipment of Ormic Spa axles and pins are made of steel C40, the grommets and the wheels are heat-treated and hardened at high frequencies. The same heat treatment is applied with particular attention to the cutting blades of the baler which are made of steel for heavy tools. Bearings and rollers are made of bronze BZ14, Nylatron, black GSM of high density. Trolley wheels and axles are equipped with grease blocks and zert fittings for easy lubrication.

The surface treatment (painting) is made by specialized technicians using a high quality paint dual consistence with epoxy base and anti-corrosive, passed with two coats of color to achieve the appropriate thickness, the same procedure is applied to the rest of the sorting plant.
Extra attention is given to the protective guards, which should retain the convenience of operator to intervene without compromising the security according the existing legislation.

General Characteristics

Total Length

9.050 mm

Width

5.600 mm (edge to edge)

Height

1.350 mm (at the hopper base)

Hopper base

1.600 x  940 mm

Bale Section

1.000 x  800 mm (dim. W x H)

Bale Length

Variable

Baler Weight

14.5000 kg (less oil)

Technical Characteristics

Installed Power

14,7+14,7+3+2+1,5 KW

Operating Pressure

308 bar MAX

Ram Force

75,000 kg

Ram Face Pressure

9.38 kg/cm²

Oil reservoir capacity

1200 liters

Cooling

Ventilated air/oil exchanger

Volume production per hour

165 m3/h

Loose material of density 30Kg/m3

4.500 Kg/h

Loose material of density 35Kg/m3

9.500 Kg/h

Extrusion Chamber Volume

1.4 m3

Number of bindings 4

Cycle time

15-20sec

Cycles per minute

3

Binding time

24 sec